Grace Engineered Products PESD Safeside R-3D2 Série Notice D'installation Et Mode D'emploi page 2

PESD
™
Class I Groups :
A- acetylene
B- hydrogen
C- ethyl-ether vapors, ethylene or cyclopropane
D- gasoline, hexane, naptha, benzene, butane, propane, alcohol, acetone, benzol, lacquer solvent vapors,
or natural gas
Division 2 : Ignitable concentrations of gases, vapors, or liquids are not likely present under normal operating
conditions
Haz Loc Normal Atmospheric Conditions : a) -25C to +40C ambient b) 21% Max. Oxygen
concentration per volume c) barometric pressure range of 80 kPa (0.8 bar) to 110 kPa (1.1 bar)
BE SURE POWER IS SHUT OFF PRIOR TO INSTALLING THIS DEVICE!
SAFESIDE
UL NEC CLASS 1, DIVISION 2 Patented
AUXILIARY DEVICE SUITABLE FOR USE IN CLASS 1,
DIVISION 2 (or ZONE 2), GROUPS A, B, C, D
HAZARDOUS LOCATIONS, or NONHAZARDOUS LOCATIONS ONLY
EXPLOSION HAZARD – DO NOT DISCONNECT
EQUIPMENT WHILE THE CIRCUIT IS LIVE OR UNLESS THE AREA IS KNOWN
TO BE FREE OF IGNITABLE CONCENTRATIONS.
®
Flex-Mount Voltage Indicator R-3D2
2