Setting Up Your Camera; Install The Batteries - HP Photosmart M527 Mode D'emploi

Setting up your
2
camera

Install the batteries

1. Open the Battery/Memory card door
by sliding the door latch as
indicated on the Battery/Memory
card door.
2. Insert the batteries.
3. Close the Battery/Memory card door.
Note Turn the camera off before
removing the batteries. If using rechargeable NiMH
batteries, fully charge the batteries before using them
the first time.
Camera usage and battery type will
affect battery life. Alkaline batteries
provide far less battery life than either
Photo Lithium or NiMH batteries. For
complete information, see Appendix A in the electronic
User Guide.
Battery Minimum
type
Alkaline 77
NiMH 215
Photo 365
Lithium

Setting up your camera

Number of shots
Maximum Average
180 120
380 290
600 485
CIPA
80
205
423
9