Place The Mounting Disc; Attach The Caraudio Connect Fm - Belkin CarAudio Connect FM Mode D'emploi

InITIAL seTUp
sections
table of contents
Optimal
Acceptable
Avoid
CarAudio Connect FM LineCast Auto FM
1 2

place the Mounting Disc

1�
2�
3�

Attach the CarAudio Connect FM

The product will magnetically attach to the mounting disc. The product
can be easily removed and stored when not in use.
5
3 4
Find a smooth and flat surface on the dashboard in front of you
that is within easy reach but will not interfere with driving.
The CarAudio Connect FM has a built-in microphone and should
be as directly in front of you as possible. See image for some
recommended areas.
Clean the surface with an alcohol swab if possible, or with a
cleaner that can remove any residue from polish/shine products
that have been sprayed on the dash in the past. Please make sure
to read all instructions on the cleaner to make sure it is safe to use
on dashboards.
Peel away the back of the mounting disc to expose the adhesive
and stick it to the dashboard.
5 6