Mount The Capxl - LiftMaster Cloud CAPXL Manuel D'installation

INTRODUCTION
2
Mount CAPXL
1. Attach the goose-neck gasket (provided) if mounting to a goose-neck.
2. Mount the CAPXL securely to a fl at surface or pedestal with
appropriate hardware taking care to route wiring through appropriate
knockouts. Stainless steel hardware is recommended to mount
the CAPXL. Use of zinc plated or galvanized hardware is at risk for
galvanic corrosion. NOTE: Ensure the cover can fully open to allow
access after the installation is complete.
1/4" x 1-1/2" Ribbed Neck
Security Bolt (4)
Goose-neck
Gasket
PRE-INSTALL
Pedestal Mount
Optional Back Box and Trim Kit
(Model CAPXLTK)
Wi-Fi ® Antenna
®
Optional Wi-Fi Antenna
Extension (Model WFAEXT)
INSTALL NETWORK
Recess Mount
12
ACCESS CONTROL
DO
Make sure the CAPXL is properly sealed to
prevent damage to the CAPXL from moisture.
Surface Mount
Security+ 2.0 ®
Radio Antenna
Optional Radio Antenna
Extension (Model 86LM)