Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CPS7500PRO /CPS7500PIE
INSTALLATION GUIDE
Note: The installation must be done by professionals.
1. Remove the cover from the back of the machine.
2. Make sure the POWER SW, Output
Selector, and the BATTERY SW. are
turned off. (Step1)
EPS will not function if the Output Selector is OFF. Make sure the Selector on Normal position
after all installation procedures.
Step 2
3. Connect the AC OUTPUT connections (AC plugs or terminal connections). (Step2)
4. Connect the AC power source to AC INPUT (Make sure AC power is off first). (Step3)
Copyright © 2011 CyberPower Systems, Inc.
Step 1
Step 3
6
Publicité
Table des Matières
