CyberPower CPS7500PRO Manuel D'utilisation page 11

CPS7500PRO /CPS7500PIE
10. LOAD CAPACITY Meter: This meter displays the approximate output load level (in 20% increments)
of the EPS's battery outlets.
EPS Status Inquiry and Functions Setup
EPS status inquiry and functions setup
1. General Mode
a. Press the "Display" button to check the status of the EPS.
b. Press and hold the Display toggle for 4 seconds.
If the machine is in the Battery Mode, it enters the status of Mute.
If the machine is in the Line Mode, it proceeds to Self Test.
c. If the Display toggle remains untouched for over 30 seconds, the LCD backlight will turn off
automatically.
2. Set-up Mode
Step 1: The machine enters Set-Up Mode after holding the Display toggle for 10 second Icon
4,5,6,7,8,9 lights indicate that Set-Up Mode.
Step 2: By pressing the Display toggle, users can switch between setup functions. User configurable
functions are as follows:
a. Delay Time: The time delay between switching from Battery Mode to Line Mode. There are 9
different settings. The default setting is 0 minutes.
Function description: The machine will switch from Battery Mode to Line Mode after the AC
power transmission reaches stability within the preset delay time.
b. Battery AH: The function adjusts the battery charging current according to the capacity of the
connected batteries. It can be configured for AU(auto),25,50,75,100,125,150,175 and
200AH.The default setting is 200AH.
Function description: The charger will automatically adjust current to setting value.
c. Nominal Output Voltage: Configures the correct electricity/voltage supplied in the area/country
where the EPS will be used. 220V, 230V and 240V may be selected. The system default setting
is 220V.
Copyright © 2011 CyberPower Systems, Inc.
Item
Input Voltage
Output Voltage
Output Frequency
Load
Load Capacity
Battery Capacity
Centigrade
Fahrenheit
Unit
V
V
Hz
Kw
%
%
℃
℉
10