Warranty - Husqvarna DE 110S Manuel D'utilisation

Warranty

New equipment sold by , is warranted to be free from
manufacturing defects in normal service for a period
of one (1) year from date of purchase by the original
consumer purchaser*. Component manufacturers offer
separate warranty periods. Call Technical Services at
(800) 365-5040 for complete information.
Husqvarna´s obligation under this warranty is expressly
limited to the replacement or repair at Husqvarna
Construction Products, or at a service facility designated
by us, of such part or parts as inspection shall disclose
to have been defective.
This warranty does not apply to defects caused
by damage, unreasonable use, faulty repairs made
by others or defects caused by failure to provide
reasonable maintenance, while in the possession of the
consumer. Further, the warranty is void if the product,
or any of its components, is altered or modified by the
consumer or if the product is used in an inappropriate
manner or with a blade not recommended by the
manufacturer.
(*) Husqvarna offers a 1-year warranty on all equipment
with the following exceptions:
• Large flat saws - 2 years (Diesel and gasoline
powered flat saws > 30 hp)
• DM 280/DM 340/DM 650 core drill motors - 2 years
• PG 530/PG 680/PG 820 (all variants, including RC) -
2 years, or 1,000 hours (whichever comes first)
• Blade Clutch on large flat saws - 6 months
Wear items are not covered under warranty:
• Belts
• Bearings**
• Cart wheels
• Filters
• Wheels***
• Wear pads
• Spark plugs
(**) Except IntelliSeal System
(***) Except delamination
28
Warranty
1587 - 007 - 24.01.2022