Bluetooth ® Wireless Technology - Husqvarna DE 110S Manuel D'utilisation

WARNING:
permitted to use a temporary adapter in
Canada, refer to C22.1.
WARNING:
the temporary adapter until a grounded
outlet can be installed by an approved
electrician.
The power plug (A) is grounded and can be used with or
without a temporary adapter (B).
(Fig. 3)
Use an adapter when the outlet (C) is not grounded. Use
the temporary adapter to connect the power plug to the
outlet that is not grounded. The tab for grounding screw
(D) on the adapter must be connected to a grounded
outlet box cover. You must use the metal screw (E) to
hold the adapter in position.
(Fig. 4)
Do not use an adapter if the outlet (F) is grounded.
(Fig. 5)
To do before you operate the product
WARNING:
the risk of injury, make sure that you attach
the product plug fully to the extension cable.
Do regular checks of the connection while
you operate the product to make sure that
it is fully attached. Do not use an extension
cable that makes a loose connection.
Note:
The operation conditions are 800 m/2625 ft
maximum altitude, temperature between -10⁰C/14⁰F to
+40⁰C/104⁰F and humidity 85%.
Note:
Read the operator's manual of the attached
equipment carefully. If specified requirements or settings
are given for the dust extractor, make sure that you obey
these.
1. Read the operator's manual carefully and make sure
that you understand the instructions.
2. Do the daily maintenance. Refer to
schedule on page 19 .
3. Make sure that the work area is clean and bright.
4. Use personal protective equipment. Refer to
Personal protective equipment on page 12 .
5. Make sure that the product is installed correctly.
1587 - 007 - 24.01.2022
6. Make sure that the frequency and voltage shown on
It is not
7. Attach the product cord (A) with the extension cable
To attach the dust extraction hose
Only use
1. Open the hose connector. (Fig. 7)
2. Put the hose adapter in the hose connector. (Fig. 8)
3. Push the hose adapter until you hear a click to get it
To remove the dust extraction hose
•
To attach and adjust the floor nozzle
1. Put the end of the handle fully into the shaft of the
2. Turn the knob (A) at the rear of the floor nozzle
To prevent
Bluetooth
Products with built-in Bluetooth
can connect to mobile devices and enables additional
functions from Husqvarna connect.
The symbol for
on when your mobile device is connected to the product.
(Fig. 12)
To use embedded connectivity with
fleet
Note:
supplied with embedded connectivity.
Note:
will be enabled on the first time of connection to a power
outlet, and stay on after that.
Maintenance
1. Download the Husqvarna Fleet Services iOS or
2. Go to Husqvarna Fleet Services website https://
the type plate agrees with the power supply voltage.
This is also applicable for the extension cables.
(B) during operation to make sure that they stay
connected. (Fig. 6)
WARNING:
antistatic hose to prevent antistatic effects.
in correct position.
Push the hose lock button (A) and pull the dust
extraction hose. (Fig. 9)
floor nozzle. (Fig. 10)
to adjust the floor nozzle wheels. Different surfaces
and different types of dust and materials make it
necessary to adjust the wheels to get the best
performance. (Fig. 11)
®
wireless technology
®
Bluetooth
wireless technology comes
This part is applicable only for products
Radio transmission by the Bluetooth
Android app Husqvarna Fleet Services.
fleetservices.husqvarna.com for more information.
Use an
®
wireless technology
®
function
15