Other Connections; Connecting Auxiliary Components; Recording Mode; Connecting External Antennas - Pioneer XV-DV232 Mode D'emploi

07

Other connections

Chapter 7
Other connections
Connecting auxiliary
components
Using the stereo analog inputs, you can
connect an external component such as a
VCR, MD or CD player for playback through
this system.
Tape deck, etc.
AUDIO
OUTPUT
VIDEO
OUT
VIDEO
• Connect the AUDIO IN jacks to the analog
outputs of an external playback component.
Connect using RCA pin-plug stereo cables.

Recording mode

The Recording mode allows you to make
surround-compatible analog recordings from
the AV CONNECTOR output.
multichannel sources will be downmixed to
stereo for improved playback with systems that
can provide matrix-decoding (like Dolby Pro
Logic).
Note
1 • When Recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while Recording mode is on.
• When Recording mode is off, the audio from the AV CONNECTOR output may be interrupted, depending on the operation.
• The Recording mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
24
En
LINE 2
R
FRONT
IN
L
R
R
SURROUND
AUDIO S
1
Dolby
1 Press SOUND MODE .
2 Use (cursor left/right) to select REC
MODE then press ENTER .
3 Use (cursor up/down) to select
MODE ON or MODE OFF then press ENTER to
confirm.
• MODE ON – Multichannel sources are
downmixed to stereo for recording (the
same downmix is heard through the front
speakers and the subwoofer).
• MODE OFF – For regular multichannel
playback through your speaker system
(only the front left and right channels are
output from the line output).

Connecting external antennas

For an external AM antenna, use 5–6 meters of
vinyl-insulated wire and set up either indoors or
outdoors. Leave the loop antenna connected.
Outdoor antenna
Indoor
antenna
(vinyl-coated
wire)
AM
LOOP ANTENNA
5–6m