Product Description; Technical Data - WOLFF ROBO-STRIPPER 230 V Traduction Du Mode D'emploi Original

1.0 Product description

Important components of the machine
The numbering of the product features refers to the
illustration of the machine on the graphics page 2 + 3.
A B
+
1 Additional weight back
2 Pedal
3 Rear Carriage
4 Grip
5 Star-shaped knob
6 Connecting Antriebsmotoren
7 Interlock, rear Carriage
8 Straight bracket
9 Eye hook, back
10 Rear frame
11 Hand grip
12 Motor
13 Machine pod
14 Cable strain relief
15 Additional weight grey
16 Blade
17 Blade angle adjusting
18 Carriage
19 Hinge
20 Inner driving wheel
21 Clamping lever
22 Handle
23 Connecting operator's desk
24 Actuator
25 Eye hook, front
26 Positioning additional weigh
27 Impact
28 Frame impact
29 Wheel
30 Machine pod
31 Plug
32 Line switch On
33 Line switch Off
34 Stroke mechanism
35 Emergency stop
36 Impact On
37 Impact Off
38 Mounting band
39 Connecting cable
40 Joystick right
41 Joystick left
Functional description
Please refer to the graphics on pages 2 - 5 while
you read the operating instructions.
01/2014 ROBO-STRIPPER #073888
Restriction of use
The ROBO-STRIPPER is exclusively for removing
bonded floor coverings in dry environments.
It should not be used for any other purpose. Uzin Utz
AG cannot be held responsible for any damage or loss
caused by incorrect use.
Declaration of Conformity
We declare under our sole responsibility that this product is
in conformity with the following standards of standardization
documents: DIN EN 1037, EN ISO 12100, DIN EN 60204-1,
DIN EN 60745-1, DIN EN 55014-1, DIN EN 55014-2,
according to the provisions of the: 2006/42/EC,
2004/108/EC, 2006/95/EC.
Dipl.-Ing. (FH) Dieter Hammel
Authorised to issue this declaration and for the gathering of the
technical documentation.
07.04.2015 i.V.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1

Technical data

Power supply .................................................230 V AC
Frequency ............................................................50 Hz
Power consumption drive ............................ 2 x 900 W
Power consumption impact............................. 1.300 W
Stroke rate .........................................3.000 stroke/min.
Weight total...................................................ca. 276 kg
Additional weight front..........................4 x 21 kg
Additional weight back ...............................25 kg
Sound pressure level ...................................89,6 dB(A)
Sound energy level ....................................100,6 dB(A)
Hand/arm-vibration.........................................<2.5 m/s²
Blade's width. ...................................................350 mm
Speed ....................................................0 - 18,8 m/min.
Speed rverse .........................................0 - 25,1 m/min.
Includes:
1 ROBO-STRIPPER
1 Blade 350x60x1,5 mm
1 U-shape blade, top cutting edge
1 U-shape blade, bottom cutting edge
1 Blade cover
1 Tool pouch
1 Hearing protection
1 Protecting gloves
1 Fork wrench SW24
1 Clue Star-shaped knob
1 Allen key SW 6
1 Allen key SW 8
1 Manual
1 Spare parts list
19