Waeco AirConServiceCenter ASC5100G Notice D'utilisation page 79

ASC 5100G
5. Use the keypad (2) and the cursor keys to enter the vehicle data.
6. Press ENTER to confirm.
7. Enter the refrigerant filling quantity. Use the value shown on the fill-
ing quantities sticker in the vehicle and enter it using the keypad (2)
and the cursor keys and press ENTER.
8. Use the cursor keys  or  to select whether the air conditioning
system has two°connections (high pressure and low pressure) or
only one connection (high pressure or low pressure).
Press ENTER to confirm.
✓ The fully automatic air conditioning service is started.
✓ After the air conditioning service has finished, you will be prompted to
disconnect the hoses (7) and (8) of the AirCon Service Center from the
vehicle air conditioning system.
9. Disconnect the service hoses (7) and (8) and press ENTER to con-
firm.
The service hoses will now be drained. The unit is then ready for fur-
ther use.
10. Put the valve caps of the vehicle air conditioning system back on the
connections.
EN
HP/LP PORT
HP PORT
LP PORT
ENTER-OK STOP-EXIT
Operation
79