Avanca WATERPROOF Mode D'emploi page 8

WATERPROOF BLUETOOTH SPEAKER | USER MANUAL (EN)
For iOS devices
1. Enter the 'Settings' menu. If necessary,
activate the Bluetooth functionality.
2. Now the waterproof speaker will appear in
the list of Bluetooth devices. Click the device
and wait until the pairing has been
carried out.
For Android devices
1. Go to 'Apps' and find the 'Settings' menu.
Open the menu. If necessary, activate the
Bluetooth functionality.
2. The device will automatically detect all
Bluetooth devices in its vicinity. If it does not,
please click on 'Scan' until your waterproof
speaker appears in the list.
3. Click on the waterproof speaker and wait
until the pairing has been carried out. Click
on 'OK' when you are asked to confirm
the device. Now you can enjoy speaker and
listen to the music played on your Bluetooth
device. You will also be able to answer
incoming calls on your phone. The speakers
range is about 10 metres.
3.3 Operating the speaker
Use the control panel at the centre of the
speaker to operate the device.
switching the speaker on/off; keep
pressed for detection Bluetooth devices
briefly press for previous track, keep
pressed for lowering volume.
briefly press for next track, keep pressed
for increasing volume.
answering/ending calls
play/pause music
8