Avanca WATERPROOF Mode D'emploi page 7

WATERPROOF BLUETOOTH SPEAKER | USER MANUAL (EN)
1. CONTENTS OF THE PACKAGE
1. Waterproof Bluetooth speaker
2. Charging cable
3. Manual
2. TECHNICAL SPECIFICATIONS
– Bluetooth 2.1+EDR
– For Android and iOS devices
– Range: 10 metres
– Simple control panel for regulating volume
and fast forward/rewind
– The speaker memorises several devices
– Frequency: 2.4 G HZ
– Rechargeable 400mAh Li-ion battery
– Charging time: about 3 hours (5V, 0.1-0.12A)
– Running time: about 6 hours
3. INSTRUCTIONS FOR USE
3.1 Charging the waterproof speaker
Attention! Be sure that the speaker is dry
before charging it.
Connect the headset by means of the USB cable
to a USB adapter (not supplied) and connect the
adapter to the mains electricity (power outlet).
Alternatively, you can connect the USB cable
directly to a suitable energy source such as your
computer's USB port. After about 3 hours the
headset will be completely charged. After about
3 hours the speaker will be completely charged.
During charging a red LED light is lit.
NB: When charging, the Bluetooth con-
nection and the speaker will be automatically
switched off.
3.2 Pairing the speaker to your
Bluetooth device
1. Make sure that the speaker is switched off.
Put the speaker in pairing mode by keeping
the ON/OFF button pressed. You will see a
blue LED light flashing.
2. Pair the speaker to the Bluetooth device
of your choice according to the following
instructions.
Attention: pairing the Bluetooth device may,
depending on the mobile device to be paired,
vary lightly from the steps below. In that case
please follow the instructions in the manual
of your mobile device. Insert '0000' in case a
password is requested.
7