EnGenius FreeStyl 1 Manuel D'utilisation page 8

a. Redial: Stores 10 phone numbers (up to 26 digits each) dialed most
recently. Can perform last-number redial on all 10 numbers.
b. Received & New Call Log: Total 50 entries (16-digit phone number,
16-character names, and Date/Time stamp), needs Caller ID
service from local telephone company.
c. Phone numbers and names can be saved into phonebook while in
display.
8. Call Barring: block outgoing call and incoming call.
a. Outgoing call:
a-1. Block the users from dialing long distance calls or international
calls
a-2. Up to 5 digits of each call barring setting; up to 5 entries
allowed.
a-3. If you need to dial a specific number to retrieve the dial tone,
you need to key in that number while setting the call barring
b. Incoming call:
b-1. PA On/Off: Enable or disable the broadcast from other
handsets or base. When PA is Off, the handset can't receive
broadcast from base or other registered handsets, but it can
broadcast to base or other registered handsets.
b-2. Line On/Off: Enable or disable the capability to receive
incoming call from telephone line. When Line is Off, the handset
can't receive incoming call from telephone line, but it can still make
outgoing call.
b-3. Int. On/Off: Enable or disable the intercom from other handsets
or base. When Int. is Off, the handset can't receive intercom from
base or other registered handsets, but it can intercom to base or
other registered handsets.
c. This changing requires to entering the "Call Settings" (MENU-4-3).
[Note] you need to key in the accurate user ID and password to perform
this feature. The default password is "0000"
9. Any Key Answer (except
10. Key-guard
a. When the keyguard is selected, all keys will be locked.
Press UNLOCK (Left) soft key followed by "＊" to release it.
b. The keyguard will be automatically enabled once returning back to
idle mode for 15 seconds.
11. Dialing Prefix
and SILENT Soft Key)
~15~
Up to 14 digits, including pause(s), one access code can be pre-
programmed to be added automatically in front of the dialed number
when dialing from call logs, phonebook, and dial-and-send dialing.
12. Call Hold
a. Places call on hold from handset or base.
b. Battery Hot Swap: Change battery while call is on hold (call hold on
handset).
13. Mute
a. Press MUTE (Left) soft key (handset) during talk, the handset
microphone will be muted.
Press UNMUTE (Left) soft key (handset) to release it.
b. Press during talk, the base microphone will be muted.
Press again to release it.
14. Phonebook
a. 50 entries, each stores a phone number or handset ID (up to 26
digits) and name (up to16 characters)
b. Alphabetically sorted display and search
c. Dial from display
d. During the stand-by mode, you can enter the phone book by
pressing scrolling key
e. Phone book transfer via air
i. Transfer specific phonebook to one handset or all registered
handsets
ii. Transfer all phonebooks to one handset or all registered
handsets
15. Key tone
a. Four-level key tone volume selections (Off/Low/Medium/High)
b. Four key tone type selections
16. Call Timers
Display call time duration for current call during and immediately after
the call
17. Programmable Feature Call
a. Allow user to pre-program the most frequently used Feature code
into FreeStyl 1 which is adjunct to the PBX system.
b. Up to 10 entries can be saved.
c. Once the feature code is being programmed, you can quickly
~16~