Additional Handset Features - EnGenius FreeStyl 1 Manuel D'utilisation

(1) Single beep: successful key entry
(2) Double beep: indicates power on/off
(3) Triple beep: failed operation
(4) Periodic 1-Long-2-Short beep (every 1 minute): low battery warning、
out of range、call on hold
(5) Periodic Long Series of beeps (repeat every 30 seconds): indicates
confirmation for saving success
Re: No any beep for invalid key entry
3. TALK/FLASH (
)
a. Places or answers a telephone or intercom call
b. Sends a Flash signal to phone line to retrieve a dial tone after the
call ends, or to perform the call waiting feature provided by local
phone companies during a call.
4. SPEAKERPHONE (
)
Press the key to enable/disable the speakerphone during incoming,
outgoing or intercom call.
5. 2-WAY INTERCOM / TRANSFER (
a. Places an intercom call to another handset, a group handset (group
paging) or all registered handsets.
b. Intercom calls are digital, full duplex, and are conducted without the
assistance from the base.
6. BROADCAST ( )
a. Half duplex broadcasting to handsets for immediate announcement.
b. Half duplex broadcasting to base station.
Re：Press the key on the side of handset to activate the broadcast
function.
7. Left/Right Soft Keys ( )
Make menu selection.
8. Up( ) /Down( ) Scrolling Keys
a. Scroll through records and menu selections.
b. Adjust receiver voice volume when in the Talk mode.
c. Press to adjust ringer volume when in the Standby mode.
d. Press to enter phonebook when in the Standby mode.
9. END; On/Off Key (
)
)
~13~
a. Ends a call.
b. Leaves current menu operation, up one level.
c. Press for 3 seconds to off the power
10. CALLER ID Key ( )
a. Review caller ID list.
b. Including received and missed caller ID.

Additional Handset Features

1. Multiple handsets registration
a. Up to 9 handsets can be registered to a base station
b. ID 11-19: individual Handset IDs.
c. ID 91-99: Group IDs. Handsets can "subscribe" from the handset
menu to group(s) and be paged when a landline caller or an
intercom caller enters a Group ID.
2. Ringer Vibrator
a. Two options for Line (incoming call) ringing & Intercom ringing.
b. Six-level ringer volume selections (Off/Low/Medium/High/Vibrate/
Vibrate & High) for each option.
c. Eight ringer type selections for each option.
3. Caller ID
Displays incoming call phone number and name on the LCD (needs
Caller ID service from local telephone company)
4. Call waiting with caller ID
nd
Displays 2 incoming call information on the same phone line when 1
call is in progress (needs Call Waiting with Caller ID service from local
telephone company)
5. Name tagging with caller ID
Match the caller ID with the phone book entries; once matched, the
LCD screen will display the name or nickname instead of pure caller ID
info (needs Call Waiting with Caller ID service from local telephone
company)
6. DND (Do Not Disturb, i.e., Silent Ring)
7. Call Logs
~14~
st