Panneau Avant (Série Lhv1000) - Lorex LHV1000 Série Manuel D'instructions

Masquer les pouces Voir aussi pour LHV1000 Série:
Table des Matières

Publicité

4
Panneau avant (Série LHV1000)
1. Récepteur IR et indicateurs DEL : IR receiver for the remote control. Keep the IR re-
ceiver clear from obstructions.
• NET : Glows when network is in normal state. Turns off for network error.
• HDD : Glows to indicate hard drive is in normal state. Turns off when there is a hard
drive error.
• ALARME : Not supported.
• PWR : Glows to indicate the system is on.
2. FN : Performs special functions in some menus.
3. ESC : In menus, press to go back / exit menus. In playback, press to return to live view.
4. Touches directionnelles :
: Depuis le visionnement en direct, appuyez une fois pour ouvrir l'écran Infor-
mation du système. In menus, press to confirm menu options.
• Touches directionnelles : Press to move cursor in menus. In live view, press up to
change split screen layout; press left / right to select channels when single-channel
mode is selected.
5. Port USB : Connect a USB mouse (included) or connect a USB flash drive (not inclu-
ded) for data backup or firmware upgrades.
6. Bouton d'alimentation électrique : Appuyez et maintenez pour éteindre le système
(mot de passe du système requis). Press to power the system back on.
#LX400014; r. 1.0/14086/14086; fr-CA
1
2
3
4
5
6
7

Publicité

Table des Matières
loading

Table des Matières