Technical Specifications; Safety Rules - Forch 5352 5615 Mode D'emploi

Operation Manual Needle Scaler
Dear Customer ! Before using this machine it is necessary to study the operation manual carefully.
Thank you.

Technical Specifications

Model Needle No. of N Blows Weight Inner Hose Max.
Diameter eedles
5352
5615 mm Pcs.
3 12
Sound level according to DIN 45635-20. Vibrations according to ISO 8662.
Application-Function-Maintenance

Safety rules

- Always wear eye protection and protective clothing / equipment to avoid injuries
- Pay attention, that the operation pressure never exceeds over 6,3 bar
- Do not use pneumatic tools in explosive atmosphere
- For sufficient tool performance make sure that the correct hose - size and fittings are used when connecting
the tool
- Disconnect the tool from the air - supply before changing accessories or when not in use
- Never carry the tool by the hose
- Do not touch moving parts
- Keep tool away from your body while working
- Always wear ear – protection
- Check air hose connections
- Only disconnect the machine without pressure of the air, to avoid infractions by uncontrollable movement of
the air hose
Only to use the machine for the described application. Rodcraft debars liability for consequences for
alienated applications or contravention against the safety rules.
Trouble shooting
You can minimise tool „ down time „ by trying your own trouble shooting before sending a not full functioning
tool to our.
Customer Service Headquarters or a distributor for expert attention.
- Check all compressor components and air delivery lines for leaks.
- Check airline whether there is dirt, water or rust in the lines
- Check whether the impact mechanism or the air motor is overoiled
- Check whether the compressor and the pressure is as required by the tool.
Diameter
1
min. kg mm
4000 1,30 8
IG= female thread
Air Consumption
Pressure average-continuous Inlet
bar l/min.
6,3 120 / 180
AG= male thread
Air Noise Vibration
LpA
inch dB(A)
1/4"IG 88,2
2
m/s
7,1