LENCO Sportcam-400 Mode D'emploi page 20

9.2 The use of remote control.
You can take a photo/ video or power off the camera by using a remote control.
Make sure the signal emission port of the remote controller face to the infrared light window of the camera while
pressing button to control the camera.
Note: The remote control doesn't have function to power on the camera.
9.3 Remote controller battery replacement
When the remote control battery is low, need to replace the battery, please be careful to open the battery door
with a coin, avoid scratching the battery door., When replacing the battery, put a coin inside the groove in the
18