First Use - SilverCrest SSSES 1.5 B2 Mode D'emploi

Fig. 3
7. Replace the battery compartment latch
battery compartment latch
battery compartment latch
(see fig. 2).
8. Place the main appliance
Then turn the soap tank
and secure on the main appliance
now ready for use.

First use

1. Place the appliance on a level and stable surface.
2. Rotate the soap tank
main appliance
3. Turn the soap tank latch
the soap tank
4. Fill the soap tank
–
or
–
5. Fill up with water up to the marking max
tank
SSSES 1.5 B2
symbol until the two symbols
7
8
.
8
up to the marking 1:3
1 to 3 (one part soap to three parts water).
up to the marking 1:2
1 to 2 (one part soap to two parts water).
8
.
Fig. 4
e
clockwise towards the lock
e
audibly clicks into place
7
back onto the soap tank
8
clockwise until it is sitting tight
8
anticlockwise to remove it from the
.
9
anticlockwise to remove it from
with liquid soap:
w
to provide a mixture level of
q
to provide a mixture level of
e
. Turn the
are aligned and the
7
. The appliance is
0
in the soap
GB │ IE
8
.
│
7 ■