Camplux BW Série Manuel D'utilisation Et D'entretien page 16

1
15
● Take the appliance out from carton box and remove the foam and plastic bag,
position the upper mounting bracket and partially install the center mounting
screw.
● Install 2 size D batteries (NOT included) in the battery box on the bottom of the
appliance. Check the batteries are facing the correct direction.
● Use shifting wrenches to attach supplied gas regulator (with brass connector
already attached) to the appliance. And connect to the bottom of the appliance
marked "Gas inlet". Do not over tighten. Over tighten may causing a gas
leak! Ensure that you use supplied washers on all connectors and check for
any gas smell. Please connect with torque force between 20-28N/m.
Before ignition as instruction. Make sure the gas inlet connector and water inlet
connector are screwed all the way on.
Tighten the fittings with use wrenches on both the brass adapter fitting on the
appliance and the brass connector on the end of the hose.
*Already attached to the gas inlet
3330-A Marathon Ct Charleston, SC 29418
Visit Us: Camplux.com
Negative Outward
Positive Outward
Don't around any
sealing tapes on
the thread
+1(844) 538-7475
support@camplux.com