Camplux BW Série Manuel D'utilisation Et D'entretien page 11

CAUTION: Label all wires prior to disconnection when servcing controls. Wiring
errors can cause improper and dangerous operation. Verify proper operation
after servicing.
THIS CONNECTION IS FOR LOW-VOLTAGE BATTERY ONLY. DO NOT
CONNECT TO 120 OR 240 VOLTS AC.
∅5.3 Rubber ignition wire 220mm
Round electrode 21
connect to ground electrode
Plug with protective cover connect
to power positive and negative pole
Battery box
4.8 Plug covered by thermal shrinkage
tube to prevent dry combustion
Temperature controller
3330-A Marathon Ct Charleston, SC 29418
Visit Us: Camplux.com
91.5
HV1 HV2 S
Black
Red
Covered ∅3.5 by yellow
wax pipe 400mm
White
∅5.3 Rubber feedback wire 220mm
Connect to blue identification
Covered ∅3.5 by yellow wax pipe 220mm
Plug in white/water controller switch wire
SM-3A Plug in black electrovalve
White
Black
Black
Blue
Red
Yellow
Microswitch
White
+1(844) 538-7475
Solenoid valve
support@camplux.com
10