Klarfit Myon Cycle Mode D'emploi page 56

EN
56
Functions
Function
SCAN
TIME
SPEED
DISTANCE
CALORIES
PULSE RATE
Operation
Press MODE button until "" appears at SCAN
position.
The monitor will rotate through the following
functions: TIME – SPEED – DISTANCE – CALORIES
– PULSE. Each display is held 6 seconds.
Counts the total time from exercise start to end.
Displays the current speed.
Counts the distance from exercise start to end.
Counts the total calories from exercise start to end.
Press MODE button until "" appears at PULSE
position.
Before measuring your pulse rate, place your palms
of your hands on both of your contact pads and the
monitor will show your current heart beat rate in
beats per minute (BPM) on the LCD display after
6–7 seconds.
Note: During the process of pulse measurement,
because of the contact jamming, the
measurement value may be higher than the
virtual pulse rate during the first 2–3 seconds,
then will return to normal level. The
measurement value can not be regarded as the
basis of medical treatment.