Klarfit Myon Cycle Mode D'emploi page 45

Step 2
A Take the front post (04) and connect the middle computer wire (D) with
the lower computer wire (E).
B Release the tension knob and the tension cable (36) on the front post
(04), then connect it with the lower tension cable (F). Insert the cable
(36) nut onto the lower tension cable (F) bracket slot, pull the tension
cable (36) and slide through lower cable (F) bracket to vertical direction.
The cable nut will sit on top of the cable bracket.
C Insert the front post (04) into the main frame (01) and finger tighten
with 4 curved washers (34) and 4 allen bolts (33).
EN
45