Using Your Freezer - Beko RCHE300K20W Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5

Using your freezer

The
operating
regulated by the temperature control.
Warm
1
2
(Or) Min.
0=System cooling is off.
1=Lowest cooling setting
(Warmest setting).
5=Highest cooling setting (Coldest
setting).
The average temperature inside the
fridge should be around +5°C.
Please choose the setting according
to the desired temperature.
Please note that there will be
different temperatures in the cooling
area.
The coldest region is immediately
above the vegetable compartment.
The
interior
depends on ambient temperature,
the frequency with which the door is
opened and the amount of foods kept
inside.
Frequently opening the door causes
the interior temperature to rise.
For this reason, it is recommended
to close the door again as soon as
possible after use.
temperature
Cold
3
4
5
Max.
temperature
also
is
The interior temperature of your
refrigerator changes for the following
reasons;
• Seasonal temperatures,
• Frequent opening of the door and
leaving the door open for long
periods,
• Food put into the refrigerator
without cooling down to the room
temperature,
• The location of the refrigerator in
the room (e.g. exposing to sunlight).
• You may adjust the varying interior
temperature due to such reasons
by using the thermostat.
• If the ambient temperature
is higher than 32°C, turn the
thermostat button to maximum
position.
• If the ambient temperature is lower
than 25°C, turn the thermostat
button to minimum position.
14
EN

Publicité

Table des Matières
loading

Table des Matières