Important; Rinse-Aid; Basket Loading; Starting The Washing Cycle - AFG ACO1000 Manuel D'installation, Utilisation Et Entretien

Machine without detergent dispenser:
The detergent must be added about every five
washes in the quantity suggested by the
selected supplier:
open the loading door and introduce the
detergent inside the tank;
close the door again.
Machine with detergent dispenser:
The detergent is added automatically during the
washing cycle:
before starting the cycle, make sure there is
detergent in the tank and that the suction
pipe is emerged in the detergent.
IMPORTANT: Never soak naked hands
in the washing solution containing
the detergent.

RINSE-AID:

The machine is equipped with a rinse-aid
dispenser which works using the machine
rinsing pressure. Its quantity is adjustable by
micrometric screw (by turning it clockwise you
diminish the quantity, by turning it counter-
clockwise you increase it). We recommend a
dose of about 5cm per each cycle as the
rinsing product is very foamy.
NOTE: Upon first installation, it may be necessary
to prime the doser in the following way:
Loosen the adjustment screw until it stops
press the screw in until the rinse-aid has
filled the tube.

BASKET LOADING:

In loading the basket with glasses, plates or
dishes in general, a number of important factors
must be taken into consideration:
Load the dishes upside down in the baskets
in a stable position and possibly without these
touching one another;
make sure the sprayer arms can turn freely;
use glasses and dishes suitable for washing
in dishwashers;
the plates must be placed in the basket in a
forward inclined position;
push the basket in so it slides on the rollers
and make sure it is completely inserted in
the machine;
close the door.

STARTING THE WASHING CYCLE:

The start, work function setting and stop of the
washing cycle is done by means of the controls
on the control panel on each machine as
described in this manual. With the machine ready
for cycle start (light indicator on) perform the
following operations in sequence:
Cycle start:
By means of the switch or button, select the
most suitable washing cycle from among
those that can be preset;
press the "Cycle Start" button to start the "set
washing" cycle. At this point the machine
starts the washing cycle automatically.
During the washing cycle, it is possible to:
on some machine models, before the rinsing
cycle starts, select by means of the switch
the "rinsing with hot water" or "rinsing with
cold water" modes.
At the end of the washing cycle:
All the machines are set to stop automatically
at the end of the washing cycle. The stop is
indicated by the light of the "Cycle Start"
button switching off;
at the end of the cycle, open the door, take
out the basket with the washed glasses or
dishes and remove these.
At the end of the day:
switch off the machine;
move the master switch to "OFF";
remove the overflow pipe and empty the
machine;
leave the door ajar.
23
ENGLISH