Jabra PRO 9470 Mode D'emploi page 9

note: If your desk phone has an electronic
hookswitch or GN1000 Remote Handset Lifter,
then the connection closes automatically.
5. Close the audio channel from your headset to your
desk phone by doing one of the following:
- Touch the end-call icon on the touchscreen.
- tap the multifunction button at the back of your
headset.
- Remove the headset and place it in its cradle on the
base.
US
to place a call over a softphone or mobile phone:
1. Put on your headset.
2. Dial your mobile phone or softphone and press the
call button as usual. The base detects that you have
placed a call and opens the connection to your
headset automatically.
3. When you are done talking, do one of the following
to hang up:
- Press the end-call button on your mobile phone or
softphone.
- Touch the end-call icon on the touchscreen.
- tap the multifunction button at the back of your
headset.
- Remove the headset and place it in its cradle on the
base.