Samsung HT-J4500 Guide D'utilisation page 29

✎
The Home Theater only supports Middle
Quality SBC data (up to 237kbps@48kHz),
and does not support High Quality SBC data
(328kbps@44.1kHz).
✎
The AVRCP feature is supported. It's functionality
will differ, depending on the specifications of the
connected device.
✎
Connect only to a Bluetooth device that supports
the A2DP Profile.
✎
Only one Bluetooth device can be paired at a
time.
✎
The search or connection functions may not work
properly in the following cases:
- If there a strong electric field near or around the
home theater.
- If several Bluetooth devices are simultaneously
paired with product.
- If the Bluetooth device is turned off, not in
place, or malfunctions.
Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetooth device,
and can cause electric interference.
✎
For the best operational compatibility between the
home theater and a Bluetooth device or any other
device, such as a Mobile Phone, we recommend
you update the device's OS to the latest version.
To Disconnect the Bluetooth Device from the
Home Theater
You can disconnect the Bluetooth device from the
Home Theater. For instructions, refer to the Bluetooth
device's manual.
• When the Home Theater is disconnected from the
Bluetooth device, the Home Theater will display
DISCONNECTED on the front display.
To Disconnect the Home Theater from the
Bluetooth Device
Press the ( ) button on the front panel of the Home
Theater to switch from BT to another mode or turn
off the Home Theater.
• Except when you disconnect the Home Theater
by changing functions, the connected Bluetooth
device will wait a certain amount of time for
a response from the Home Theater before
terminating the connection. (Disconnection time
may differ, depending on the Bluetooth device.)
✎
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Home Theater System and the Bluetooth device
exceeds 32.8 feet. When the Bluetooth device
comes back into effective range or you restart the
Bluetooth device, you will have to pair the device
and home theater again to reconnect.
✎
In Bluetooth mode, the screen saver will start if
the Bluetooth device stays in the Ready state for
5 minutes. To reconnect the Bluetooth device,
turn off the screen saver, and then connect the
device. To turn off the screen saver, press any
button on the remote control (the Volume button,
a number button, etc.)
Using the Bluetooth Quick Start
When the home theater is turned off, connecting
your smart device to the product via a Bluetooth
connection can turn the home theater on.
✎
The Quick Start function is available when the
home theater's power cord is plugged into an AC
wall outlet.
✎
To use this function, set Settings > System >
Quick Start to On.
✎
To use this function, the Bluetooth connection
between the home theater and your smart device
should have been established before. In other
words, the home theater should be found on the
list of Bluetooth devices your smart device has
already connected to.
1. Connect your smart device to the product
via Bluetooth. (For information on Bluetooth
connections, refer to your smart device's manual.)
2. Once connected, the home theater will turn itself
on automatically in BT mode.
• Select the desired music to play on your smart
device.
29
- English