Before Turning On The Power; Bundling The Cables - Pioneer KURO KRL-37V Mode D'emploi

Quick guide

Before turning on the power

Standard DIN45325 plug (IEC 169-2) 75 q
coaxial cable
Supplying power to the antenna
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
Press h and the "HOME MENU" screen displays.
1
Press a/b to select "Setup".
2
Press a/b to select "Antenna Setup-DIGITAL", and
3
then press ENTER.
Press a/b to select "Supply Voltage", and then press
4
ENTER.
Press c/d to select "On", and then press ENTER.
5

Bundling the cables

Bundle the cables with
14
Cable clamp
the clamp.
1 Carefully insert the
CA Module in the
Common Interface
slot with the contact
side forward.
2 The logo on the CA
Module must be
facing forward from
the rear of the TV.
(For Europe, except
U.K. and Eire)
AC cord
(For U.K. and Eire)
Place the TV close
to the AC outlet, and
keep the power plug
within reach.