Description Of The Machine; Operator Position - TECO 40 TOP Manuel D'utilisation

6. DESCRIPTION OF THE MACHINE

The machine is an electro-pneumatically oper-
ated tyre changer.
It works on all types of whole rims with channel,
with weights and dimensions as described in
the TECHNICAL DATA section.
The machine is solidly constructed. It oper-
ates with the wheel in a vertical position for
bead breaking and in a horizontal position for
mounting and demounting tyres. All machine
movements are controlled by the operator by
means of the pedals.
Each machine carries a plate Fig. 9 reporting
its identification data and some technical data.
As well as the manufacturer's details, it indicates:
Mod. - Machine model;
V - Power supply voltage in Volts;
A - Input voltage in Amperes;
kW - Absorbed power in kW;
Hz - Frequency in Hz;
Ph - Number of phases;
bar/psi - Operating pressure in bar and/or psi;
Serial No. - machine serial number;
ISO 9001 - company Quality System Certification;
CE - CE marking.

6.1. OPERATOR POSITION

The figures 9a show the operator's positions and the relevant hazardous areas (P) during
the various work phases:
A Bead breaking
B Tyre demounting and mounting
C Inflation area
Before removing the machine from the pallet, make sure the items shown below
have been removed.
RISK OF INJURY DUE TO CRUSHING. The column tilting and the self-centring
clamp opening/closing operation must be performed from working position B
(fig.9a), keeping hands away from machine moving parts.
92
Mod.
V
A
kW
Hz
Ph
bar/psi
WARNING
WARNING
ANNO DI COSTRUZIONE /
Code
MANUFACTURED
X-XXXXXXXX/XX - XX
Serial N.
XXXXXXXXX
A
P
P
B
C
User's manual
9
9a