Installation Instructions
Installing the Optional Caster Wheel Accessory
To convert the stationary unit into a mobile unit, please follow the instructions below.
Installing the optional caster wheel accessory should require at least two people to
prevent injury.
Optioanl Caster Wheel Accessory: PRCAST-C001
1.
Empty all contents within the outdoor beverage cooler.
2.
Remove the leveling legs from the outdoor beverage cooler by lifting a side of the
cooler or laying the beverage cooler on its back and twisting the leveling legs
counterclockwise. Perform this step for each leveling leg.
3.
Install a caster wheel with 4 provided screws. Perform this step for each corner.
4.
Set the beverage cooler back to its upright position. Place all contents back into the
outdoor beverage cooler.
16