Installing The Handle - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

Presrv refroidisseur de boissons extérieur à zone unique

Masquer les pouces Voir aussi pour PRB24C01AS-OD:

Table des Matières

Les langues disponibles

Installation Instructions

Installation Clearance Requirements cont.

When installing the outdoor beverage cooler under a counter, follow the recommended

spacing dimensions shown.

⚫

The cabinet should allow at least 24" for the width and 34" for the height to

accommodate the outdoor beverage cooler.

⚫

Once you are ready to install the unit, you must adjust the feet to level the outdoor

beverage cooler.

Installing the Handle

Push aside the door gasket on the side

you wish to install the pro style handle.

Under the gasket you will see two

designated holes for handle installation

and pre-installed screws.

Install the pro style handle tightly as shown

with two screws, lock washers and flat

washers pre-installed.

NOTE: An optional contemporary handle may

be used rather than the pro style handle. Its

part number is PRHAN-C101.

Table des Matières

Table des Matières