Installation Instructions; Carbon Filter; Installation Clearance Requirements - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

Presrv refroidisseur de boissons extérieur à zone unique

Masquer les pouces Voir aussi pour PRB24C01AS-OD:

Table des Matières

Les langues disponibles

Installation Instructions

A built-in carbon filter protects your beverage by acting as a natural barrier against

harmful odors. The carbon filter should be replaced every 3-6 months depending on the

unit's exposure level to odor. If the unit is placed in a kitchen, regular replacement every

three months is ideal.

Remove the carbon filter by turning counterclockwise to unlock from rear panel.

Carbon Filter Replacement Part #: Z0F-C004

When installing the outdoor beverage cooler under a counter, follow the recommended

spacing dimensions shown.

⚫

To ensure proper service access and ventilation, allow at least 1" of clearance at

the back as shown in the diagram.

⚫

The installation should allow the unit to be pulled forward for servicing, if

necessary.

⚫

The power cable is located on the back right of the unit and has a length of 72" to

accommodate multiple outlet locations.

An installation next to a wall will require a minimum 2-1/4" door clearance to

⚫

accommodate the handle.

Table des Matières

Table des Matières