Table des Matières
Publicité
BLOWER ASSEMBLY
THE BLOWER ASSEMBLY MUST BE DISCONNECTED FROM THE SOURCE OF ELECTRICAL SUPPLY BEFORE
ATTEMPTING THE INSTALLATION.
THE BLOWER ASSEMBLY IS INTENDED FOR USE ONLY WITH A STOVE THAT IS MARKED TO INDICATE SUCH USE.
DO NOT ROUTE THE SUPPLY CORD NEAR OR ACROSS HOT SURFACES!
Fix the assembly to the back of the stove with the four screws provided.
PEDESTAL TRIM ASSEMBLY
Attach trim piece to the pedestal base at the
location shown using the screws provided.
Assembly Instructions
-4-
ASH PAN ASSEMBLY
Remove ash pan from firebox. Under the
firebox, there are two brackets; Slide the ash
pan into these brackets.
Publicité
Table des Matières
