JVC DLA-RS20 Manuel D'instructions page 36

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Settings
4
Setting Menu (Continued)
Input Signal > Video/S-Video
Video/S-Video
13
Configures the Video/S-Video input signals.
NTSC Setup Level
Adjust this only when NTSC signals are input via Video or S-Video terminal.
Color System
The setting is
available
Input Signal > PC
PC
14
Configures PC input.
Auto Alignment
Tracking
Phase
Picture Position
This can be set only when selecting PC input terminal.
Input Signal > Picture Position
Picture Position
15
Adjusts the horizontal/vertical position of the projected image.
The position of the image varies depending on the input signals. The image of some signals may not be fully displayed. Adjust the position
of image using this menu to display the image properly.
Input Signal > Aspect (Video)
Aspect (Video)
16
Configures the screen size of the projected image.
4:3
16:9
Zoom
This setting can also be configured from the remote control. (
The
items
cannot be set in the case of PC signals.
36
0IRE
7.5IRE
Auto
NTSC
NTSC4.43
PAL
PAL-M
PAL-N
SECAM
only when the Video or S-Video input image is projected.
Automatically adjusts "Tracking", "Phase" and "Picture Position".
Adjust the horizontal size and display area of the image.
(This may vary depending on the signal, but does not usually require adjustment.)
Adjust flickering and blurred images.
(This may vary depending on the signal, but does not usually require adjustment.)
Adjust the display position of the image.
Sets the screen size of the projected image as 4:3.
Sets the screen size of the projected image as 16:9.
Zooms the images. (This item cannot be selected in the case of HD signals.)
Adjusts the gradation for signals without the 7.5 IRE setup.
Adjusts the gradation for signals with the 7.5 IRE setup.
Configures the color system automatically.
Select this when the color system is NTSC.
Select this when the color system is NTSC4.43.
Select this when the color system is PAL.
Select this when the color system is PAL-M.
Select this when the color system is PAL-N.
Select this when the color system is SECAM.
P16)

Publicité

Table des Matières
loading

Table des Matières