Voice - Optelec ClearReader+ Basic Manuel D'utilisation

+
Optelec ClearReader Basic

Voice

This menu item lets you select your reading voice and language. To select another reading voice,
open the menu and navigate to the Voice button with the Back and Forward button on the
+
ClearReader Basic or the arrow keys on the feature pack. To change the voice or language, press
the Play / Pause button.
+
The ClearReader Basic will switch to the next configured voice. If adjusting the reading voice
results in a change of language, the menus will automatically change to the same language. To
add or delete voices and languages from the voice selection, please refer to the Settings Menu.
Note: In case automatic language detection is enabled, this button only changes between voices
of the detected language. For instance, if the detected language is English this button will only
change between the different English voices. With automatic language detection enabled, you will
not be able to change the language of the menu. To change the menu language, either: 1) disable
45 English