Save - Optelec ClearReader+ Basic Manuel D'utilisation

+
Optelec ClearReader Basic

Save

To be able to save documents, you will need to insert a SD card into the SD slot above the USB
+
port on the right-hand side of the ClearReader Basic. Alternatively, you can use a USB memory
stick to save documents. By default a document will be saved on the SD card. If you wish to save
+
your document on a USB drive, connect a USB drive to the ClearReader Basic. When a USB
drive is connected, the document will always be saved on the USB drive.
To save a document, open the menu and navigate to the blue Save button with the Back and
+
Forward button on the ClearReader Basic or the arrow keys on the feature pack. Activate the
Save button with the Play / Pause button.
First you will be asked if you would like to save your document with a voice label.
English 40