Features; Auto Power Down - Gallagher HR5 Notice D'installation

3E3183 Gallagher HR5 Hand Held EID Tag Reader User Manual

FEATURES

Screen
& Keypad
USB connector under Dust cap
Feature
Trigger
Light
Vibrator
Antenna
USB
connector &
Dust cap
Memory

Auto Power Down

The HR5 will power itself down after 30 minutes of inactivity.
6
Trigger
Description
When in the 'Read Tags' (Collect) screen, pull the trigger
to begin reading tags.
The red light flashes when transmitting and illuminates
continuously when a tag is read.
A single vibration is felt in the handle with every
successful EID tag read.
The HR5 antenna has a read range of 27–33 cm.
Note: If there is more than one tag within range, neither
tag may be read.
The supplied USB cable connects to the HR5 via the
connector beneath the dust cap. This cable enables:
• data to be transferred to/ from a computer
• the supplied USB charger to charge the internal
battery.
Replace the dust cap when cable not in use.
• Over 100,000 EID records can be stored in the HR5.
• When the memory is 90% full, a pop up warning will
be displayed.
• When the memory is full, no further tag reads will
be accepted until one or more sessions have been
deleted.
Light
Antenna