Ayce V190529 Manuel D'utilisation page 27

the device with water.
3. Remove the filter, clean the filter with a vacuum
cleaner or soapy water no hotter than 40 °C.
(Fig 6 & Fig 7)
4. Rinse and dry the filter completely before installing
back to the device. Insert the filter into the unit in
smoothly. (Fig 8)
6
Storage
If the dehumidifier will not be used for a long period of time, take the following
steps:
1. Remove the plug from the socket and empty the tank make the tank and the
dehumidifier, dry completely, this may take a couple of days.
2. Clean the air filter.
3. Check the dehumidifier for perfect condition to ensure a safe use of it after a
long period of storage.
4. Pack the device with the suitable packaging.
5. Store the dehumidifier in a dust-free and out of direct sunlight location,
preferably covered with a sheet of plastic.
7 8
TROUBLESHOOTING
If conditions listed below occurs, please check the following items before calling
the customer service.
Problem Possible Caus
Has the power cord been
disconnected?
Is the tank full indication
The unit doesn't
lamp blinking? (The tank is
operate
full or in a wrong position.)
Is the temperature of the
room above 35℃ or below 5
℃?
The
Is the air filter clogged?
dehumidifying
function doesn't
work
Is the intake duct or
discharge duct obstructed?
No air is
Is the air filter clogged?
discharged
Is the unit tilted or
Operation is
unsteady?
noisy
Is the air filter clogged?
52 | 53 GB
Solution
Plug the power cord into the
outlet.
Empty the water in the
drainage tank and then
reposition the tank.
The protection device is
activated and the unit cannot
be started.
Clean the air filter as instructed
under "Cleaning the
dehumidifier".
Remove the obstruction from
the discharge duct or intake
duct.
Clean the air filter as instructed
under "Cleaning the
dehumidifier".
Move the unit to a stable,
sturdy location.
Clean the air filter as instructed
under "Cleaning the
dehumidifier".