What To Do If - White-Westinghouse Frigidaire XDEX75NZ Manuel De L'utilisateur

What to do if...

IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engi-
neer. Before contacting your local Service Centre, please carry out the checks listed below.
During appliance operation it is possible that few acoustic signals sound to indicate that the appliance is not working.
Once the problem has been eliminated, press the button 7 to restart the programme. If after all checks, the problem persists,
contact your local Service Centre.
Malfunction
Dryer does not start.
Dryer runs but won't heat.
Drying cycle takes too long, outside of the dryer
feels too hot or smells hot.
Excessive wrinkling.
10
Electrical power cord is not securely plugged in or plug may be loose.
• Make sure the plug fi ts tightly in wall outlet.
House fuse blown or circuit breaker tripped.
• Reset circuit breaker or replace fuse.
• Make sure electrical line is not overloaded and the dryer is on a separate circuit.
Thermal limiter tripped.
• Call authorized service person for replacement.
There are 2 house fuses in the dryer circuit. If 1 of the 2 fuses is blown, the drum may
turn but the heater will not operate. (electric models).
• Replace fuse.
Lint fi lter is clogged with lint.
• Make sure all lint has been removed from the dryer lint fi lter before starting each
cycle.
Exhaust duct requirements have not been met.
• Exhaust duct must be at least 100 mm in diameter and made of rigid or semi-
rigid metal.
• When in place, the duct must have no more than two 90° bends and must not
exceed 2 m.
Drying procedures have not been followed.
• See "Operating Instructions."
Outside exhaust hood or exhaust duct may be clogged or restricted.
• Clean out any obstruction.
High humidity.
• Use a dehumidifi er near the dryer.
Dryer is overloaded.
• Do not overload. See "Operating Instructions."
Items left in dryer too long.
• Remove items as soon as cycle ends.
Insuffi cient sorting of items.
• See "Operating Instructions."
Drying temperature too high.
• Follow fabric care label instructions.
Possible Cause / Solution