Publicité
Les langues disponibles
Les langues disponibles
from moisture or permanent sun exposure.
The mentioned range (100 meters) is the free field range. Any electromagnetic disturbance or any solid or other
element that may interfere between the transmitter and the receiver.
In any case, it is advisable before any final installation, to make the placement tests to find the ideal place where the bell and the clock
(receiver) will work in harmony.
ONCE THE LOCATION DETERMINED
NOTE: screws not supplied
SIGNAL RECEPTION
Icon
Signal reception
Icon
Temperature trend
TROUBLESHOOTING
-
If the ringing sound is weak, if it does not ring, or if the display is out of focus, please replace the batteries.
-
In the event of a fault, press the reset button "RESET" on the back of the product.
-
If the battery replacement time of the receiver exceeds 40 seconds, please reset the product by pressing
the "RESET" button.
-
Set the time and alarm again after replacing the batteries or resetting the product.
MAINTENANCE AND CLEANING
-
Before any maintenance, remove the batteries from the unit
-
Do not clean the product with abrasive or corrosive substances
-
Use a soft, slightly moistened cloth.
-
Do not spray with an aerosol, which could damage the interior of the product.
WARNING ON BATTERIES
•
Never mix alkaline, standard (carbon-zinc) and rechargeable (nickel hydride).
•
Don't mix new and used batteries.
•
Don't attempt to recharge non-rechargeable batteries.
•
Remove rechargeable batteries from the device (if possible) before charging them.
•
Rechargeable batteries must always be recharged under adult supervision.
•
Remove used batteries.
•
Never short the power supply terminals.
•
Always use the recommended or equivalent battery types.
•
Always pay attention to battery polarity.
WARNING: You should not dispose of this device with your household waste. A selective collection system for this type of
product is implemented by your local authorities. Please contact your local authorities to find out how and where
collection takes place. These restrictions apply because electrical and electronic devices contain dangerous
substances that have harmful effects on the environment or on human health and must be recycled.
This symbol indicates that electrical and electronic devices are collected selectively. The symbol shows a waste container
crossed out with an X symbol.
Transmitter
Indicator tables
Connecting
Decrease
Imported by PRODIS SAS, 1 rue de Rome, 93110 Rosny-sous-Bois, France
Marketed by EUROTOPS VERSAND GMBH D-40764 LANGENFELD, Germany
Receiver
Connected
Connection failed
on
Stable
Increase
Norecepti
Made in PRC
4
Publicité
