Publicité
Les langues disponibles
Les langues disponibles
EP543/D-648
PLEASE READ THIS MANUAL BEFORE YOUR FIRST USE AND KEEP IT SAFE FOR FUTURE REFERENCE
SPECIFICATIONS
•
Wireless doorbell
•
range 100 meters (in open field)
•
32 different bell melodies
•
Time display in 12H or 24H format
•
2 programmable alarms
•
Indoor and outdoor temperature display
•
Transmission frequency: 433.92MHz
INSERTING BATTERIES
Batteries (Not supplied): 2 batteries 1.5V type of LR03/AAA (transmitter), 2 batteries 1.5V type of LR06/AA (receiver)
•
Open the battery compartment of the transmitter with a pointed object (not supplied)
•
Insert the batteries according to the +/- polarity
•
Close the battery compartment cover.
SETTING THE RECEIVER
NOTE: If no operation is done for about 10 seconds, the product confirms the setting automatically.
SETTING THE TIME
When displaying the normal time:
-
Press the "SET" button to select the 12 / 24H time display.
-
Press the "SET" key for 2 seconds, the time flashes, then press "UP" or "DOWN" to adjust the time you want, then
press "SET" again, the minute portion will flash, then press "UP" or "DOWN" to set the minutes. Press "SET" again to
confirm.
SETTING THE ALARM CLOCK
When displaying the normal time, press "MODE" once, then press "SET" for 2 seconds to enter alarm setting 1.
When displaying the normal time, press "MODE" 2 times, then press "SET" for 2 seconds to enter the alarm setting 2.
-
Press "UP" or "DOWN" to set the flashing part.
-
Press "SET" again to confirm.
When displaying normal time:
Press "UP" once to active the alarm 1 (the alarm icon 1
-
Press "UP" again 1 time to active the alarm 1 2 (the alarm icon 2
-
Press "UP" the third time to active the alarm 1 and 2 (the alarm icon 1 and 2
-
screen)
-
Press "UP" the fourth time to disable the alarms (alarm icons 1 and 2
screen)
To stop the alarm, press any
DISPLAYING TEMPERATURE
When displaying the normal time, press the "° C / ° F" button on the back of the product to select ° C or ° F.
Ambient and outdoor temperature is detected and displayed automatically after battery installation and good signal
reception.
SELECTING THE BELL MALODIES
Press the button at the bottom right of the receiver to choose your desired
MOUNTING
CAUTION: The bell is designed to withstand various weather conditions, but for greater safety it must be protected
Wireless doorbell – alarm clock – indoor/outdoor thermometer
Introduction manual
Transmitter
Receiver
key.
appears on the screen)
appears on the screen)
appears on the
disappear from the
melody.
3
Publicité
