Ega Master 56060 Manuel D'instructions page 16

REPLACEMENT OF THE ROLLERS:
1. With a 3mm hexagonal wrench, loosen the set screw of the upper roller. (Photo nº 2)
2. With a brass punch hit on the upper roller shaft until it comes out and release the upper roller.
(Photo nº 3, 4 y 5)
3. Then loosen the retaining nut of the lower shaft. (Photo nº 6)
4. The lower shaft will be freed and it will come out with the lower roll. (Photo nº 7, 8 y 9)
5. We can perform the replacement of rolls.
1
4
7
16
2
5
8
3
6
9