Information For Disposal - AXEL Body TRAINER Instructions Pour L'utilisation

The equipment is protected up to the following environmental
conditions:
Without the supplied package
ambient temperature
relative humidity
pressure
With the supplied package
ambient temperature
relative humidity
pressure

INfORMATION fOR DISPOSAL

The product is subject to the WEEE regulation (presence of the
symbol on the label) on recycling: for the disposal of the product,
please use the specific equipped areas for the collection of
electronic material or contact the manufacturer.
MAINTENANCE AND PROBLEM SOLVING
If the equipment is used according to what indicated in this
manual, any particular routine maintenance is required.
If you encounter malfunctions or problems in the use of
Body Trainer, check the following:
It does not turn on. Check the charging status of the battery
•
and eventually replace it (see chapter "Battery change"). If the
problem continues contact the manufacturer.
It does not transmit electrical impulses. Check that you
•
have properly turned the regulation wheel and check that the led
light is on. If the problem continues contact the manufacturer.
Body Trainer turns off during operation. We recommend to
•
replace the battery and start again the treatment. If the problem
continues contact the manufacturer.
The manufacturer is the only exclusivist for technical intervention
on the equipment.
CAUTIONS fOR STORAGE
ASSISTANCE
from +5 to + 40 °C
from 30 to 80%
from 500 to 1060 hPa
from -10 to + 50 °C
from 10 to 90%
from 500 to 1060 hPa
21