hestan KRPR36 Manuel D'utilisation page 20

CONTROLS AND OPERATION
WATER FILTER MANAGEMENT
The following functions display filter life, permit bypassing the filter, and provide manual
EN
flush/clean of the filter and ice maker.
Filter Status and counter reset
Functions to view remaining life and to reset counter after changing filter cartridge.
View Status
How to check the
status of the filter
Resetting filter
How to set the filtered
water meter to zero
Bypassing the filter
The included filter can be bypassed when excellent quality water is available from he home
water system.
How to de-activate
Manual clean (flush) water filter
If ice production has been disabled or unused for a long period it is recommended to perform a
Manual Clean function to flush out water which has sat in the system during this period.
Repeat the operation until the water is clean. Before proceeding it is important to turn off the
ice maker by pressing the
Correctly position the ice tray or another suitable container under the ice maker to collect
water, then close the drawer. At the end of the operation, wash the tray.
18
©2019 Hestan Commercial Corporation
The View Status function displays the remaining life of the filter.
The Reset Filter function sets the filter usage counter to zero.
Do this when replacing the filter cartridge.
How to activate
filter bypass
filter bypass
button or using the menu. (See previous page.)
How to manually
clean the filter
(CONT.)
OK