Samsung NX58 9420S Série Mode D'emploi page 43

Problem
The oven light The oven door lock is
(lamp) will not turn turned on.
on.
The Sabbath function has
been activated.
A loose or burned-out
bulb.
The switch operating the
oven light needs to be
replaced.
The oven smokes Meat or food was not
excessively during properly prepared before
broiling. broiling.
Improperly positioned
top oven rack.
The controls are not
being set properly.
Greasy buildup on oven
surfaces.
NX58M9420S_DG68-00905A-05_EN+MES+CFR.indb 43
Cause Action
The display will show the Lock
icon. Hold the oven door open,
and then press the START/SET
pad for 3 seconds. The oven
will beep and the Lock icon
will turn off.
SAb and the time of day
will show in the display. All
other controls and signals
will be deactivated. To cancel
the Sabbath function and
reactivate the light switch and
other controls, press and hold
the Bake and NUM 1 pads
simultaneously for 3 seconds.
See page 38.
Call for a qualified service
technician.
Cut away excess fat and/or
fatty edges that may curl.
See the broiling guide on page
23.
See page 22.
Regular cleaning is necessary
when broiling frequently.
Problem Cause
Cooking is The fan automatically
finished, but the runs for a certain amount
cooling fan is still of time to ventilate the
running. inside of the oven.
The oven will not The oven door lock is
self-clean. turned on.
The oven is too hot.
The self-cleaning oven
controls are not properly
set.
A surface burner is on.
A crackling or This is normal.
popping sound.
Action
This is not a product
malfunction. The fan is
designed to run automatically
for a period of time to cool
down the oven.
The display will show the Lock
icon. Hold the oven door open,
and then press the START/SET
pad for 3 seconds. The oven
will beep and the Lock icon
will turn off.
Let the oven cool down, and
then reset the controls. The
self-clean cycle will not lock
the oven door if the oven
temperature is too hot. The
door must lock before the self-
clean cycle can start.
Reset the self-cleaning oven
controls. (See page 36.)
Turn off the surface burner.
Self-clean will not operate if a
surface burner is on.
This is the sound of the metal
heating and cooling during
any cooking or cleaning
function.
English 43
2018-08-29 4:58:30