Victron energy Impulse S6 Mode D'emploi page 8

5. SETUP OF THE CHARGER
When placing the charger it should be observed that it has sufficient ventilation all around.
A space of at least 10cm should be allowed. When used under normal circumstances the
built-in ventilator will be activated during charge (only Impulse S8). If there is not sufficient
ventilation or the temperature is high, the charger will lower the output current (resulting in
longer charge time) or if the temperature rises over a maximum value, the charger will
stop charging.
The cabinet is made of plastic and suitable as a table model.
During normal operation the housing is getting warm. This is normal.
6