Accessories; Wireless Remote Control - Techly I-ALARM-KIT001 Manuel D'installation

Accessories

Wireless Remote Control

Disarm
SOS
LED indicator
Home Mode
Arm
Arm the system
Press the Arm button " " to arm the
alarm system. The LED indicator lights
up (the control panel beeps once). The
system is armed.
If an intruder is detected, the siren
rings out. (The siren turns off after 5
minutes as per default settings.) In the
meantime, the system dials the stored
phone numbers automatically.
Disarm the system
Press the Disarm button " " to disarm
the alarm system. The LED indicator
turns off (the control panel beeps
twice). The system is disarmed.
Home Mode
Press the Home Mode button " " on
the remote control. The system state
LED is on. All the sensors in regular
zones are armed except those in the
Home Mode zone. The sensors in the
Home Mode zone are disarmed so that
users can move inside their home.
www.techly.com 23