Hama FreeStereo Twins Mode D'emploi page 12

Note
• If pairing was successful, the status LEDs (3) emit blue flashes
of light every five seconds.
• If pairing was not successful, the status LEDs (3) emit a flash
of light once every five seconds, and you will have to perform
pairing again.
• It may be necessary to change the settings on your terminal
device to enable it to automatically connect to the paired
headset.
Note – Connection impaired
After the headset and terminal device have been paired,
a connection is established automatically. If the Bluetooth
connection is not established automatically, check the following:
• Go to the Bluetooth settings on your terminal device and
check whether FreeStereo Twins are connected. If not,
repeat the steps listed under 5.3 Bluetooth pairing with
terminal device.
• Check whether obstacles are impairing the range. If so, move
the devices closer together.
• The performance can also be affected by a weak battery.
10