Axis Q6032-E Guide D'installation page 10

Page 10
Install AXIS T8124 High PoE Midspan 1-port
Axis T8124 High PoE Midspan enables Axis network video products with high power consumption
to receive data and power over the same Ethernet cable. Follow these instructions to connect
AXIS T8124.
Note:
Axis can only guarantee full functionality with the AXIS T8124, no other High PoE devices
are supported.
1. Connect the AXIS T8124 (Data in) to the network switch using a standard network cable.
2. Connect the AXIS T8124 (Data and Power Out) to the network camera, using the network cable
that has been connected to the camera.
3. Connect the AXIS T8124 to an AC outlet (100-240 VAC), using the supplied power cable.
connectivity
connectivity
For information on the LEDs on the midspan, see
AXIS T8124
Port
indicator
AC Input
indicator
Network camera
AXIS Q6032-E/AXIS Q6034-E Installation Guide
Data &
Power out Data in
Ethernet
Assign an IP address,
on page 11.