Hoover IRONspeed SFD4102 Mode D'emploi page 10

Chapter 3.4 - Vertical Steam Ironing
Chapter 3.5 - Refilling the Water Tank During Usage
Chapter 4: Maintenance and Cleaning
Chapter 4.1 - Cleaning the Appliance
Chapter 4.2 - Rinsing the Boiler for Scale Maintenance
9 - 9 - GB
Ironspeed_SF__1-12_union.indd 9
Set the soleplate temperature to the max temperature and set the Multi Steam
Technology selector (12) to the Profound care program.
Hang curtains and clothes (jackets, suits, coats). Hold the iron in vertical position at a
short distance of the fabric to avoid burning it. Press the steam trigger (11) to steam
iron moving it from top to bottom.
Warning: Do not direct the steam jet towards people or animals.
You can fill the water tank at any time during use.
When the water tank is empty, the "Empty water tank" light (1b) will switch on. No
more steam escapes from the soleplate. Open the water tank filler cover (4) and refill
the water tank with the help of a bottle of water without exceeding the max mark
level.
Please refer to chapter 2.2 for more detailed instructions.
To prevent any risk of burns, all maintenance and cleaning operations should only be
carried out when the unplugged appliance has cooled down for at least 2 hours.
Do not use any detergent or descaling products for cleaning the soleplate. Regularly
clean it with a humid and non-metallic pad.
Empty the water tank after each use before storing it.
To clean the plastic parts of the stand, please use soft clothes.
In order to maximise the life of your appliance, you should rinse the boiler every 2
months to avoid scale deposit in the boiler.
Before proceeding, be sure that the appliance is cooled down and unplugged for at
least 2 hours.
Place the stand on the edge of your sink and place the iron on a flat surface. Remove
the calc removal cap (10). Unscrew the boiler rinse safety cap anti-clockwise with
a coin and remove it. Fill the boiler with 0,2 liters of tap water using a funnel and a
bottle. Shake the stand and then empty the boiler completely, filing out the water
in the sink. We recommend repeating this operation twice. Screw the boiler rinse
safety cap with a coin and put back the calc removal cap (10).
19-10-2009 17:57:55